DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS   >   Idaho   >   1-1/2 inch dema inline chemical injector number 2012 c

1-1/2 inch dema inline chemical injector number 2012 c


1-1/2 inch dema inline chemical injector number 2012 c

FOR SALE HERE IS A NEW INLINE C SERIES CHEMICAL INJECTOR.
MADE BY DEMA ENGINEERING OF ST. LOUIS, MO.
IT IS MADE FROM A SOLID BLOCK OF STAINLESS STEEL.
2 ¼” x 2 ¼” x 5 ¾” AND WEIGHS ALMOST 6 POUNDS.
SOME APPLICATIONS WOULD BE: CAR WASHES, PRESSURE WASHERS, FLOOR CLEANING MACHINES, SANITIZING TUBS, CARPET CLEANING MACHINES.
THIS IS A ONE AND A HALF INCH INJECTOR THAT IS NO LONGER AVAILABLE. DEMA STOPPED MAKING THIS SIZE 3 YEARS AGO. SO IF YOU NEED TO INJECT A LOT OF FLUIDS OR AIR INTO YOUR PRODUCT, THIS IS YOUR BABY. IN THE PARAGRAPH BELOW WHERE IT SAYS THAT YOU CAN INJECT 100 GALLONS PER MINUTE THAT IS FOR THEIR ONE-INCH SIZE. TO FIGURE OUT HOW MUCH MORE YOU CAN INJECT WITH THIS 1 AND 1/2" SIZE YOU’LL HAVE TO CONSULT WITH DEMA. GO TO THEIR WEBSITE OR CONTACT DEMA FOR DOWNLOADS TO HELP WITH CALCULATING WHAT SIZE NOZZLE BUSHING YOU WILL REQUIRE. THERE ARE 3 DIFFERENT SIZE NOZZLES INCLUDED.
HERE'S A LITTLE BLURB FROM DEMA'S WEBSITE:
C series injectors are designed to inject fluids or air into lines conveying liquid under pressure. The water being pushed through the injector creates a vacuum and the chemical or air is inducted into the water stream. C series injectors come with 3 water nozzles to help size the injector to the application flow rate. Chemical induction is determined by a metering screw or metering tips. Injectors are available from 1/8 to 1 NPT and flow ranges start at .10 gallons per minute up to 100 gallons per minute.
Temporary Email: Cora-Hayes@dontscrapit.com (Cora Hayes)




1-1/2 inch dema inline chemical injector number 2012 c