DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Minnesota
> Jorestech 4" bag sealer impulse manual heat closer +kit
Jorestech 4" bag sealer impulse manual heat closer +kit
Jorestech 4" bag sealer impulse manual heat closer +kit
NEW - IN BOX - 4" MANUAL IMPULSE SEALER
PACKAGING SPECIALTY STORE : 60+ YRS EXPERIENCE
For Sealing Plastic Bags made with any Thermoplastic Material
· 4 inch (100 mm) sealing length
· Includes Full Spare Parts Kit:
· Simple to use - No operator training
· Impulse Sealing System - Seals Uniformly - Every Time
· 0.078 inches (2mm) wide sealing
Dimensions: 8.66†(220 mm) (L) x 2.83†(72 mm) (W) x 5.51†(140 mm)(H)
Machine Weight: 3.77 lbs. (1.7 Kg)
Boxed Dimensions: 10.5†(260 mm) (L) x 3.7†(90 mm) (W) x 6.7†(170 mm)(H)
Boxed Weight: 5.11 lbs. (2.3 Kg)
FOR OVER SIXTY YEARS WE HAVE SPECIALIZED IN END-OF-PRODUCTION-LINE MACHINERY AND MATERIALS.
Other models in stock - Please check our other listings
FREQUENTLY ASKED QUESTIONS (FAQs)
Can this machine seal foil or laminated bags?
Yes, it is designed to seal any thermoplastic material, including Polyethylene, Polypropylene, and laminations containing foils, such as those used to package coffee, or those that reduce electrostatic charge that are typically used to package electronic components.
How big of a bag can I seal on this machine?
In theory you could seal bags as wide as the seal element is. In practice, though, this would mean centering the bag perfectly onto the machine, something that is difficult to do if you need to seal many bags. Take the total heat element width, and subtract 1 inch ( 2.5 cm). That is the approximate width of the biggest bag you should seal on any given model.
How do I figure the settings to seal my bags?
Setup is an extremely simple procedure and should take no more than a minute or two. Before you begin read all machine documentation carefully as it includes important safety information. Plug in and turn on Sealer (if applicable). Set up sealing time knob to level one. Put bag in sealer and test. If the bag is not sealed increase sealing timer to the next level. Repeat the process until you get the minimum time necessary to seal your bag.
Do you recommend any parts we should keep in stock?
You should always keep a few Heating Elements and Teflon Strips, as these have a limited life span. The machines come with a kit of spares, but keep an eye on how many you have left.
How often should I change the Heating Elements and Teflon strips?
These machines come equipped with Teflon-infused fiberglass strips, and flat-type heating elements with terminals. Factors that affect component life span include the type, quality, and thickness of the material you seal, how often the machine is used, how its operated, and how its maintained.
Here are a few tips that will extend the life of your components:
a) Use the minimum necessary temperature to seal the bags
b) Keep the machine free of plastic build-up or debris by carefully applying a clean rag over it
c) Spray liquid silicone on the sealing area - it acts as an additional agent against adhesion and helps dispel heat away from the fabric
Can we send you samples of our product for testing or advice?
Yes. We will gladly test your product and suggest the best alternatives for your particular need – at no cost to you. Please contact us for instructions on our testing procedures.
I need something faster than what you are offering here…
We offer semi-auto to fully automatic Impulse, Constant Heat, and Band Sealing Machines. Check our other listings or contact us for more information. We do not list all of our offerings.
Feel free to call or email us with any question you may have regarding your order, product, application, or any technical question.
For questions regarding your order: Claudine.campos@dontscrapit.com
For subjects regarding products and services: Claudine.campos@dontscrapit.com
For inquiries regarding technical matters: Claudine.campos@dontscrapit.com
TRITON PACKAGING 7865 NW 46 St. Miami FL 33166
T (305) 715.0100 or Toll Free 1 - 88 TRITON 07
Our hours of operation are Mon – Fri 9:00 am – 5:00 pm EST
Thank you for your interest in our products and services.
We treat all orders as urgent, but when speed is of essence we ask that you please notify us – we will invest additional resources into processing your order.
If you are not available during the time of delivery, it is your full responsibility to contact the courier. A consignment note will be left, and you may arrange an alternative delivery schedule with the courier. Items that are returned to us because of non-delivery will incur an additional delivery fee.
The import/export procedure is typically simple and straight forward. We do want to call your attention to the following:
What to do if you receive a damaged item:
If your item arrives damaged refuse to accept it from the currier and contact us immediately. We will send you a replacement item at once.
If you noticed the damage after receipt of the item contact us immediately. We will ask you to photograph the damage and email it to us and ask that you keep all packaging material as well as all parts, documentation, and accessories that came with the machine. You should not attempt to use the machine unless we instruct you to do so.
The free listing tool. List your items fast and easy and manage your active items.
Temporary Email: Claudine.campos@dontscrapit.com (Claudine Campos)
