DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS   >   Missouri   >   5/8" hsp rope lanyard climbing construction 6'

5/8" hsp rope lanyard climbing construction 6'


5/8" hsp rope lanyard climbing construction 6'

Just one of inkFrog's Creations
GEMTOR 5/8" HSP ROPE LANYARD CLIMBING CONSTRUCTION SAFETY #2226L6
HSP rope is made of a co-polymer of polypropylene and polyethylene with a tensile strength two times stronger than regular polypropylene. Its characteristics include: excellent UV resistance, very good resistance to alkalis and acids, very low elongation and water absorption and it will not harden with age.
The selection of your lanyard is as important as the proper selection of your body belt or full-body harness. Lanyards should be kept as short as possible to reduce the possibility of serious injury. OSHA mandates that free fall distances not exceed 6'. Gemtor recommends that an energy absorber be part of a fall arrest system whenever possible, in order to ensure that forces incurred during a fall are less than the OSHA limit of 1,800 lbs. Care should be taken to prevent abrasions or cuts. Ropes with larger diameters have greater abrasion resistance. Specify length when ordering. All lanyards, lifelines and positioning lines come standard with Model # 3155 locking snaphook(s) with 5/8" gate opening.
Temporary Email: a-drake@dontscrapit.com (Alexandria Drake)




5/8