DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Alaska
> Construction
> Ves pittsburgh lock hammer air pneumatic lock-former
Ves pittsburgh lock hammer air pneumatic lock-former
Ves pittsburgh lock hammer air pneumatic lock-former
VES PITTSBURGH LOCK HAMMER AIR PNEUMATIC
REPOLISHED HOUSING MAY SHOW SOME IMPERFECTIONS, BUT WILL NOT AFFECT FUNCTION
Shortest Handiest Pittsburgh Hammer on the Market.
New Spring Loaded Tool Retainer Eliminates the Wear and Broken Parts of Other Designs.
.This tool quickly becomes indispensable in a duct shop. It is 10 times faster than hand closing a pittsburgh lock. The hammer will pay for itself with only 4 hours of use. You will also get a smoother and neater joint
Utilizing an industry standard .401 shank air hammer, our lock hammer features 90% parts interchangeability with common industrial air hammers. Regulator, in handle controls hammering power. Low air consumption allow use of small, 1 hp (4 cfm) air compressor in the field. Much more power than electric lock hammers, and much less price even including the air compressor. The common compressors used for air nailers work great.
In the shop this hammer gets the work out the door quicker. It lets you keep on schedule, and virtually eliminates the most boring part of duct making, hammering the locks together, before you can go to work.
Demolition! The hammer is supplied with a industry standard 5 piece chisel set. Remove the Pittsburgh Guide, AH2-22, and the Mushroom chisel, AH2-21, and you have a standard .401 shank pneumatic hammer. With a flat chisel installed you can cut the heads off of bolts, rivets, screws, etc. Install a metal ripping chisel from the set, and you can demolish old ductwork. It makes a reciprocating saw look sick. No buckets of broken high dollar bi-metal blades. Its only equal is a plasma cutter, but without the sparks. For concrete, this little hammer packs more horsepower into a smaller, lighter package than any other tool. It is a baby, one handed jackhammer. Perfect for cutting, trimming, or enlarging holes in concrete. Please note, higher duty cycle demolition work will require an air source capable of 8-10 cfm.
No problem. Call, let us know what you need.
E-mail: OfeliaRowe@dontscrapit.com (Due to massive scamming please put the
Temporary Email: OfeliaRowe@dontscrapit.com (Ofelia Rowe)
