DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Colorado
> Industrial
> 3 pcs. of C1018 low carbon steel 1/8 x 1 x 8 inches
3 pcs. of C1018 low carbon steel 1/8 x 1 x 8 inches
3 pcs. of C1018 low carbon steel 1/8 x 1 x 8 inches
THREE PIECES OF AISI TYPE C1018 LOW CARBON STEEL
* TYPE OF STEEL: AISI TYPE C1018 LOW CARBON
* ANALYSIS: this steel contains – carbon, manganese, silicon, sulfur, and phosphorus
* THIS STEEL IS NORMALLY USED WITHOUT HEAT TREATMENT.
* IT CAN BE CASE HARDENED USING ANY OF THE STANDARD CARBURIZING METHODS AND SUBSEQUENT HEAT TREATMENTS.
* IT IS A FREE MACHINGING LOW CARBON STEEL WITH EXCELLENT MACHINABILITY ALLOWING FOR LONGER CUTTING TOOL LIFE
* ALL THREE PIECES ARE THE SAME DIMENSIONS
* THICKNESS: 1/8 inch flat ground surfaces
* WIDTH: 1 inch ground surfaces
* LENGTH: 8 inches rough cut and de-burred
* PICTURE: shows the actual pieces being sold along with a 1 foot ruler graduated in inches for scale
Temporary Email: gsingleton@dontscrapit.com (Gertrude Singleton)
