DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Florida
> Construction
> Starter/sampler set full gloss powder coat paints
Starter/sampler set full gloss powder coat paints
Starter/sampler set full gloss powder coat paints
This powder has been freshly manufactured in the United States and is 100% virgin (no reclaimed/recycled powder). All our powders have been properly stored in a climate controlled environment. Do not settle for excess/leftover inventory or recycled products that have been on a shelf for who knows how long.
We have tried to take the most accurate pictures possible, but differences in monitors and individual monitor settings can make for extreme differences in color representations. We have a 14 day money back guarantee. If you are not satisfied with the powder just let us know within two weeks of receiving the powder and we will refund the purchase price of the powder.
Thermosetting polyester TGIC powder coating. Polyester TGIC’s are designed for interior or exterior applications.
General metals, architectural, automotive, lawn & garden furniture, stadium seating, light fixtures, marine, fencing, etc.
Gloss 60'angle (ASTM D-523-89) 90+ (plus or minus 5)
Hardness (ASTM D-3363-92A) H-3H
Flexibility (ASTM D-1737-89) 1/16 inch
Adhesion (ASTM D-3359-95A) 5b (100%)s
Impact Direct/Indirect (ASTM D-2794-93) 160 in-lbs
Salt Spray (ASTM B117) 1000Hrs<1/8in
Specific Gravity (calculated) 1.45
Polyester TGIC’s can be cured in a direct or indirect gas convection oven, an electric oven, or an Infrared oven. A combination of any of these ovens is also suitable.
Standard Cure: 10 Minutes @ 340 degrees Peak Metal Temperature
Product should be stored at temperatures below 80f, in a dry area away from any heat source.
Temporary Email: margarita.campbell@dontscrapit.com (Margarita Campbell)
