DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Louisiana
> Industrial
> 01 / PKD01EY / PMIPKD01 / PKD01 / peak detector
01 / PKD01EY / PMIPKD01 / PKD01 / peak detector
01 / PKD01EY / PMIPKD01 / PKD01 / peak detector
Monolithic Peak Detector with Reset-and-Hold Mode
* Monolithic Design for Reliability and Low Cost
A = 25C: 0.1 mV/ms TA = 125C: 10 mV/ms
* Low Zero-Scale Error: 4 mV
* Digitally Selected Hold and Reset Modes
* Reset to Positive or Negative Voltage Levels
* Logic Signals TTL and CMOS Compatible
* Uncommitted Comparator On-Chip
The PKD01 tracks an analog input signal until a maximum amplitude is reached. The maximum value is then retained as a peak voltage on a hold capacitor. Being a monolithic circuit, the PKD01 offers significant performance and package density advantages over hybrid modules and discrete designs without sacrificing system versatility. The matching characteristics attained in a monolithic circuit provide inherent advantages when charge injection and droop rate error reduction are primary goals.
Innovative design techniques maximize the advantages of monolithic technology. Transconductance (g
m) amplifiers were chosen over conventional voltage amplifier circuit building blocks. The gm amplifiers simplify internal frequency compensation, minimize acquisition time and maximize circuit accuracy. Their outputs are easily switched by low glitch current steering circuits. The steered outputs are clamped to reduce charge injection errors upon entering the hold mode or exiting the reset mode. The inherently low zero-scale error is further reduced by active Zener-Zap trimming to optimize overall accuracy.
The output buffer amplifier features an FET input stage to reduce droop rate error during lengthy peak hold periods. A bias current cancellation circuit minimizes droop error at high ambient temperatures.
DET control pin, new peaks may either be detected or ignored. Detected peaks are presented as positive output levels. Positive or negative peaks may be detected without additional active circuits, since Amplifier A can operate as an inverting or noninverting gain stage.
An uncommitted comparator provides many application options.
Status indication and logic shaping/shifting are typical examples.
for other great component bargains on Microprocessors, Transistors, Capacitors, IC's, Transformers, Diodes, Crystals, and more!
And we salute our friends in other countries around the world!
Temporary Email: L-Benjamin@dontscrapit.com (Larry Benjamin)
