DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Louisiana
> Industrial
> New delta 28-682 18" wood cutting bandsaw ( in crate)
New delta 28-682 18" wood cutting bandsaw ( in crate)
New delta 28-682 18" wood cutting bandsaw ( in crate)
You can shop for your needs 24 hours a day, 7 days a week.
This is the Brand New in the Box w/ 2 year warranty
The 28-682 includes 2 HP, 230 Volts, 60 hz, Single Phase induction motor with magnetic starter, 18" cast iron wheels, polyurethane compound tires, rip fence with guide bar, dual 4" dust ports, wheel brushes, adjustable ball bearing, blade guides, wrenches, instruction manual.
* 2 HP, 230 Volts, Single Phase 60 hz motor.
* Cast-iron wheels with polylurethane compound tires.
* Cast-iron table with expandable table extensions.
* Ball bearing blade guides.
* Multi-locking table for added security.
* 12" resaw capacity under guides.
* Lower guide positioned close to cutting surface.
* Quick release tensioning system.
* Handles up to 1-1/4 " blades.
* Adjustable posititive stops on the table tilt.
* Fully-adjustable, upper and lower blade guides and blade support bearings maintain proper blade alignment. Integral oil detents facilitate periodic lubrication to insure trouble-free performance.
* Motor: 2 HP, 230V, 1 Phase, 60 hz
* Motor Control: Magnetic starter
* Blade Width: Min. 1/4"; Max. 1-1/2 (32 mm)
* Blade Length: Min: 135" (3429 mm); Max 137" (3480 mm); Standard: 136" (3454 mm)
* Cutting Heights: 12" (305 mm)
* Capacity Blade to Frame: 17-1/2" (445 mm)
* Capacity Under Guide and Wheel: 12
* Max Rip To Right Of Blade: 18" (457 mm)
* Max Rip To Left Of Blade: 8-1/2" (216 mm)
* Table Size: 17-3/4 x 18" (451 x 457 mm)
* Miter Gauge Groove: 3/8" x 3/4"
* Table Size Front to Cebter of Blade: 9" (229 MM)
* Table Height: 41-1/2" (1054 mm)
* Width: 45" (1143 mm); W/O rip fence rails: 32" (813 mm)
Now available business leases as little as $1000.00
* Most orders are processed the same day but may take up to 1 extra business day to be processed to ensure your item meets quality assurance.
* We use Freight Truck Ground service to a business address or residential address
* The freight companies are also subject to a number of regulations one being that they are not to give any assistance in unloading from the truck, they are only responsible to get the products to the back of the truck.
* Tracking numbers will be sent if requested. We are not responsible if your email account rejects any email from us as some email is sent in bulk and may be treated as spam.
* We are not responsible for transit time once your item leaves our facility.
* Any problems with hardware beyond our 7 business day return policy must be taken up with the manufacturer and/or carrier/network operator. The contact information to most manufacturers and carriers/network operators is listed in our Manufacturer Info section located below.
Temporary Email: Mabel_fuller@dontscrapit.com (Mabel Fuller)
