DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Maine
> Commercial
> Parker air pressure regulator & psi gage, ( # 06R313AC)
Parker air pressure regulator & psi gage, ( # 06R313AC)
Parker air pressure regulator & psi gage, ( # 06R313AC)
Primarily designed for installation in industrial compressed air lines for point-of-use (remote) air pressure regulation.
*Please note that I have 4 (four) of these units available on this listing. Each includes the pressure gage, supply-side ball valve, & delivery-side ball valve/manifold assy. Not all include the outlet air chuck as the pictures illustrate. However this is a moot point, as most end-users will retro-fit air chucks to suit compatibility/standardization to their existing systems.
* Regulator: PARKER 06R313AC, High-Flow SCFM, (75 CFM) output.
* Inlet/Outlet ports: 1/2" NPT female threads.
* Maximum Inlet Pressure: 250 PSI
* Outlet Pressure Adjustment Range: 2-125 PSI
* Locking Adjustment Knob: push to adjust, pull to lock
* Pressure Gage: SPAN Instruments glycerin filled case to assure longevity & vibration resistance. 10-300 PSI
Thank you for your interest in this high-quality pressure regulator.
Primarily designed for installation in industrial compressed air lines for point-of-use (remote) air pressure regulation.
*Please note that of the units available on this listing, each includes the pressure gage, supply-side ball valve, & delivery-side ball valve/manifold assy. Not all include the outlet air chuck as the pictures illustrate. However this is a moot point, as most end-users will retro-fit air chucks to suit compatibility/standardization to their existing systems.
* Regulator: PARKER 06R313AC, High-Flow SCFM, (75 CFM) output.
* Inlet/Outlet ports: 1/2" NPT female threads.
* Maximum Inlet Pressure: 250 PSI
* Outlet Pressure Adjustment Range: 2-125 PSI
* Locking Adjustment Knob: push to adjust, pull to lock
* Pressure Gage: SPAN Instruments glycerin filled case to assure longevity & vibration resistance. 10-300 PSI
Thank you for your interest in this high-quality pressure regulator.
Temporary Email: M.bond@dontscrapit.com (Maurice Bond)
