DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS   >   Montana   >   Axelson 34 x 216 lathe from naval facility - runs well

Axelson 34 x 216 lathe from naval facility - runs well


Axelson 34 x 216 lathe from naval facility - runs well

Pre-owned Heavy Duty AXELSON 34" x 216" Lathe - Video under power available
* Swing over cross slide 19.5"
* Max distance between centers 216"
* Spindle speeds (24) 6 to 555 RPM
* Feeds (90) .004 to .300 IPR
* Approx dimensions 342"L x 67"W x 66"H
* 2 AXIS TRAK DIGITAL READOUT
* POWER RAPID TRAVERSE ON CARRIAGE
* 2 EACH STEADY RESTS, ONE IS 15.5" AND OTHER IS 8.5"
* TAPER ATTACHMENT WITH BED CLAMP
Runs well & has been thoroughly checked & is currently ready to go. Nice lathe that we purchased from Naval facility. Note: ways have some scoring which is shown in photo of ways, this does not affect performance of machine but I want you to know anyway. Machine under power in our facility and we invite your inspection, WE CAN SEND YOU VIDEO OF MACHINE UNDER POWER IF YOU ARE INTERESTED. Low freight rates available (email us your city & state at Ingrid_hammond@dontscrapit.com), we load no charge, we have been in business since 1963, YOU ARE WELCOME TO CALL US AT (***) 531-9500 OR VISIT TOOLMACHINE.COM.
Temporary Email: Ingrid_hammond@dontscrapit.com (Ingrid Hammond)



Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well Axelson 34 x 216 lathe from naval facility - runs well