DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > New York
> Commercial eqp.
> Whhelock mt-24-wm audible signal fire alarm appliance
Whhelock mt-24-wm audible signal fire alarm appliance
Whhelock mt-24-wm audible signal fire alarm appliance
WHEELOCK MT-24-WM FIRE ALARM STROBE
The Multitone Strobe Appliances are UL Listed under Standard 1638 for Fire Protective Service, private mode and UL Standard 464 for Audible Signal Appliances. They are Listed for indoor/outdoor use, wall or ceiling mount, with the backbox specified in these instructions (see Mounting Options). The Multitone Strobe Appliances use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan lens to provide maximum visibility and reliability for effective visible signaling. Multitone Strobe Appliances can be field set to produce any one of eight commonly used alarm tones. Sound output can be field set to provide either HIGH (HI) dBA or STANDARD (STD) dBA sound output level. All Multitone Strobe models are designed for use with either filtered DC or unfiltered Full-Wave-Rectified (FWR) input voltage. The Multitone Strobe Appliances have separate input terminals for alarm tone activation and strobe activation. Shunt wires are provided to operate both the alarm tone and the strobe simultaneously on a single input circuit (See Wiring Information). All inputs are polarized for compatibility with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP).
Temporary Email: G_michael@dontscrapit.com (Ginger Michael)
