DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > New York
> Construction
> Te-6K-md march pump .5HP 3PH 230/460V
Te-6K-md march pump .5HP 3PH 230/460V
Te-6K-md march pump .5HP 3PH 230/460V
The number 6 pump has a capacity of up to 38 GPM with a maximum of 46 feet of head and is used in a wide variety of chemical and industrial applications.
The number 6 pump is the only model in the MARCH line that is equipped with a drip proof motor as standard, thus the DP designation in the nomenclature. Other motors are available, such as a TEFC, single and three phase and an explosion proof. As in other models, the number 6 pump can be made compatible with a wide range of chemicals through a myriad of "O" rings, bushings and spindles available for both the T model and the K model. The T has no significance as to materials of construction, etc. The K does, however, indicate that the pump is manufactured of Kynar® (PVDF). The options and specifications sections that follow further describe materials of construction, applications and variations in the number 6 pump - a reliable and well-made product.
SERIES 6 PUMPS INCLUDE MODELS:
T = Glass filled Polypropylene
Flow rates range from 0 to 38 GPM maximum. Feet of head range from 0' to 46 maximum.
1" FPT inlet X 3/4" MPT outlet.
The drip proof (DP) motor is a ½ HP, 3450 rpm, 115/230 Volt, single phase, 60 Hz. 3 phase not available.
The TE motor is a ½ HP, 3450 rpm, 115/230 Volt, single phase or 230/460 Volt 3 phase, 50/60 Hz, TEFC motor.
Explosion Proof motor available.
Glass filled polypropylene and Ryton®, ceramic, Viton®, Teflon®/Ryton® bushing, carbon bushing.
Etching equipment, electrical discharge machinery (EDM), D.I. water systems, and aquariums (lobster and fish).
Temporary Email: Rita_rush@dontscrapit.com (Rita Rush)