DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > North Carolina
> Motor mounts fits 10KW diesel dod mep-0003A 4 pcs
Motor mounts fits 10KW diesel dod mep-0003A 4 pcs
Motor mounts fits 10KW diesel dod mep-0003A 4 pcs
FITS MILITARY GENERATOR DIESEL 10 KW DOD MODEL MEP-0003A (60Hz)AND MEP-112A (400Hz)
3" DIA x 1" rubber cushion with metal 4 PCS
The U.S. Army has purchased these for replacement on some of their military generator units.
MILITARY NUMBER 543 01059 5483
ARMY TECH MANUAL NUMBER TM5-6115-585-24P
These are made of a very dense 1" rubber cushion sandwiched between metal plates. It must be glued and compressed together. One side is an !/8" thick 3" diameter washer with a 7/16" bolt hole. The other end is a 1/16" thick plate with a turned up inside lip that is 3/8" high.
The inside walls of the mount are tapered in and the large opening is 2-1/16" in diameter. Each one weighs 8 ounces.
The design is such that these are made with a slight angle to one side. The outside wall is slanted 1/8" to one side.
Marked LORD MFG. ERIE, PA USA P/N J-12021 (SAME AS MOBILE ELECTRIC POWER P/N 72-5051-2 )
New Old Stock, never used Onan parts.
PLEASE VISIT MY WEBSITE TO LOCATE THOSE OBSOLETE, RARE AND DISCONTINUED ONAN ENGINE AND GENERATOR PARTS. JUST COPY AND PASTE THE ABOVE ADDRESS INTO YOUR ADDRESS BAR eMAIL ME AT rhea_hogan@dontscrapit.com 1000'S OF NEW OLD STOCK ONAN PART
Temporary Email: rhea_hogan@dontscrapit.com (Rhea Hogan)
