DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Virginia
> Commercial
> Mitutoyo read out for standard mill
Mitutoyo read out for standard mill
Mitutoyo read out for standard mill
This is a Mitutoyo read out for a standard mill. It works great, we just don't need it anymore. It comes with everything you see in the pictures. It has a small dent in the upper right side as seen in the picture. It doesn't affect the readout at all, it is in the part that surrounds or shrouds the facing.
The display has a rad/dia. button for use with a lathe or a mill. The scales are AT11-N750 (Approx. travel 28in - OAL 38in - thin style) and AT2-N300 (Approx. 12in travel - OAL 19in - fat style).
The hardware is for a mill, you will have to modify the hardware for a lathe. Mitutoyo does not sell hardware for a lathe.
I put one on a Colchester lathe and it worked great. I mounted the scale for the cross-slide where it sticks out the back, so the tailstock does not hit it.
If you would like more pictures or more information, please send your e-mail address with question to n-hopkins@dontscrapit.com and we will be happy to send reply.
All electrical parts are in good working order when removed from machine.
· Items for local pickup must be claimed within 10 days.
· If you are exempt, you will need to supply us with an Ohio Certificate of Exemption.
· Problem? Please give us the opportunity to fix it. We will do our best to make it right.
· No returns on electrical parts.
· E-mail: n-hopkins@dontscrapit.com
· Use the “Ask the Seller a Question†button
Temporary Email: n-hopkins@dontscrapit.com (Nita Hopkins)
