DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > West Virginia
> Commercial
> Vacuum veneer press kit for gast & thomas pumps
Vacuum veneer press kit for gast & thomas pumps
Vacuum veneer press kit for gast & thomas pumps
Maryland residents subject to 5% sales tax.
Be sure to check out our other listings for veneer supplies and vacuum press kits.
Vacuum Veneer Press Kit for Gast & Thomas Pumps
To make it even easier to build the Project: EVS vacuum press, several woodworkers have suggested the addition of a "builder's kit". This 31-piece builder's kit includes the core components of the press.
Detailed instructions for building this system are available by clicking here.
The Project: EVS system operates more efficiently than the previous version of the system (Project: E-Vac) thanks to a smaller sub-reservoir assembly and an improved manifold design which also makes the system easier to assemble. It's also goes together 30% faster and weighs less.
* 1 Vacuum Pressure Controller
* 1 Heavy Duty Glycerin Filled Vacuum Gauge, 1/4" NPT
* 2 Screws (to attach vacuum controller to the carrier)
* 1 Three-Way Mac Valve: 120VAC, 1/4" NPT
* 1 Lock-On Vacuum Bag Connector
* 1 Vacuum Filter (high flow)
* 1 Hi-Flex Tubing (1/4" ID): 1 ft.
* 1 Heavy Duty Brass Check Valve: Female to Male, 1/4" NPT
* 1 Breather Fitting: 1/4" NPT
* 2 Brass Elbows: 1/4" NPT to 3/8" Barb
* 1 Roll of Thread Sealing Tape
* 2 Brass Branch Tee: 1/4" NPT
* 3 Brass Hex Nipple: 1/4" NPT
* 1 Brass Barbed Fitting: 1/8" NPT-Female to 1/4" Barb
* 1 Brass Female Coupler: 1/4" NPT
* 2 Brass Fittings: 1/4" NPT to 3/8" Hose Barb
* 1 Brass Fitting: 1/4" NPT to 1/4" Hose Barb
* 1 Brass Elbow: 1/4" NPT Male to Male
* 1 Brass Tee - 1/4" NPT (all male)
* 1 Braided Tubing: 3/8" I.D, 10 ft.
* 1 Braided Tubing: 3/8" I.D, 1 ft.
* 2 Crimp-On Connectors for Vacuum Controller
© 2007 VeneerSupplies.com / JoeWoodworker.com
Temporary Email: w_ellison@dontscrapit.com (Wendy Ellison)