DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Wyoming
> Construction equiptment
> 3 pcs. of C1018 low carbon steel 3/16 x 1 1/4 x 8
3 pcs. of C1018 low carbon steel 3/16 x 1 1/4 x 8
3 pcs. of C1018 low carbon steel 3/16 x 1 1/4 x 8
THREE PIECES OF AISI TYPE C1018 LOW CARBON STEEL
* TYPE OF STEEL: AISI TYPE C1018 LOW CARBON
* ANALYSIS: this steel contains – carbon, manganese, silicon, sulfur, and phosphorus
* THIS STEEL IS NORMALLY USED WITHOUT HEAT TREATMENT.
* IT CAN BE CASE HARDENED USING ANY OF THE STANDARD CARBURIZING METHODS AND SUBSEQUENT HEAT TREATMENTS.
* IT IS A FREE MACHINGING LOW CARBON STEEL WITH EXCELLENT MACHINABILITY ALLOWING FOR LONGER CUTTING TOOL LIFE
* ALL THREE PIECES ARE THE SAME DIMENSIONS
* THICKNESS: 3/16 inch flat ground surfaces
* WIDTH: 1 1/4 inches ground surfaces
* LENGTH: 8 inches rough cut and de-burred
* PICTURE: shows the actual pieces being sold along with a 1 foot ruler graduated in inches for scale
Temporary Email: jean_george@dontscrapit.com (Jean George)
