DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Nebraska
> Industrial
> Victor 0200-0224 vcm 200HS portable cutting machine
Victor 0200-0224 vcm 200HS portable cutting machine
Victor 0200-0224 vcm 200HS portable cutting machine
Scott-Gross Company, headquartered in Winchester, KY, was established in 1949 and is primarily known as a supplier of Industrial, medical, and specialty gases, bulk and cryogenic gases, dry ice, welding equipment and supplies, welder rental and repair, and propane exchange. Scott-Gross Company has retail stores located in Kentucky, Pennsylvania, Arkansas, Oklahoma, and Texas.
Victor 0200-0224 VCM 200HS Portable Cutting Machine - NEW
The versatile VCM-200 is a precision tractor-type machine that can be used on its own track for straight line cutting and a variety of welding operations. Off track and with a radius rod assembly, the VCM 200 can be used for circle cutting.
Has all the convenience and portability features of the standard VCM-200 machine, plus a speed range of 5"/13cm to 120"/305cm / Minute. The VCM-200HS has a flat mounting deck.
Brand New - Victor 0200-0224 VCM 200HS Portable Cutting Machine
APPLICATION & USES VCM 200 SERIES
Large thumb screws for hand tight adjustments
Dual drive controls & direct speed readout.
Constant speed AC induction motor located on the side opposite the torch for cooler, more efficient operation.
Counter-balanced design allows torch racking distance up to 18" from the machine.
Speed constant over wide range of temperatures
Torch holder designed for 1-3/8"/35mm barrel diameter torches.
Width: 11"/277mm (Machine Only) 28.5"/718mm (w/Torch Holder)
Height: 11.5"/289mm (Top of Torch Holder) 5.5"/138mm (Top of Machine)
Length increments of 72"/1.83m (Track length)
Circle diameters 4"/100mm to 96"/2.44m
To see full specifications, visit http:// /victor/literature/pdfs/C_VCM_200.pdf
Search our Store Inventory for the products listed below.
0212-0018 / 12 foot track section for line cutting
0212-0019 / 9 foot track section for line cutting
0212-0005 / 6 foot track section for line cutting
0252-0040 / Radius rod for circle cutting
0253-0042 / 100 inch radius rod for circle cutting
0252-0136 / Dual torch mount assembly
Temporary Email: Scollier@dontscrapit.com (Sean Collier)
