DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > Ohio
> Commercial
> Ebac industrial dehumidifiers - SD120
Ebac industrial dehumidifiers - SD120
Ebac industrial dehumidifiers - SD120
Ebac industrial dehumidifiers for commercial or large home dehumidification help prevent water damage and control odors, mildew, mold, allergies and asthma. Dehumidifiers ratings, reviews and comparisons. Reports by consumer experts.
Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifier
Helpful & Knowledgeable Staff. Call Us
Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifier
* Water Removal Capacity: 120 pints per day at AHAM (80°F 60%RH)
* Air flow: Low: 560, High: 722
* Dehumidifiers for swimming pool/spa and industrial use by Ebac with operation down to 41°F. Removes 185 pints of water per day.
Ebac’s SD120 models are capable of solving a wide variety of moisture problems. These workhorses can be placed in indoor swimming pool/spa areas, locker or laundry rooms, harsh marine environments or industrial environments where moisture control is required. Under harsh conditions the SD120 model will remove 200 pounds of water per day. These rugged and reliable machines are fit to do the job in ruthless environments.
Dehumidification for indoor swimming pool/spa area:
The air inside an indoor swimming pool and/or spa or hot tub can be very humid. The reason is that large amounts of water can evaporate from the surface of the water into the air. The water surface of your pool acts like a large humidifier capable of adding significant moisture to the room. It is important to keep the pool water cooler than the air. Ideal conditions are an air temperature of 82 degrees and a water temperature of 80 degrees. If one allows these ideal conditions to change and the pool water temperature becomes higher than the air temperature, the rate of evaporation of moisture into the air will increase dramatically.
Without effective dehumidification, you risk the appearance of mold, corrosion, structural damage, and an uncomfortable pool environment.
It is also highly recommended that you use a pool cover when the pool is not in use which will reduce the amount of moisture evaporated into the air. An added benefit to covering your pool will be the energy you will save not heating your water due to the heat that would not be lost into the air.
4 Common Indicators of Humidity Problems in Your Indoor Pool or Spa Room:
1) You find it uncomfortably humid in the pool area when in street cloths
2) Strong and persistent smell of chlorine
See the entire family of Ebac Dehumidifiers.
Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers — ideal for someone who
* Has a need for portable industrial dehumidification in moderately damp to extremely wet areas and harsh conditions.
* Needs powerful dehumidification up to 200 pints of water removal per day.
* Needs to remove unwanted moisture within an indoor pool or spa area, thus allowing a swimmer’s body to feel comfortable leaving and entering the water.
* Wants a dehumidifier that will remove moisture that may cause corrosion and structural damage within an indoor pool facility, aerobic room, workout area, or locker and laundry rooms.
* Wants to reduce sensible heat loss in a specific area.
* Has a small to medium sized enclosure with excessive moisture/humidity.
Special Features of Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifier
* Unit is self-contained for quick and easy installation – no duct work required. (can bed ducted, if desired)
* Low temperature operation down to 41°F
* Remote humidistat can be mounted anywhere to automatically maintain desired humidity level
* Built-in, easily removable washable air filter
How it Works - Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
The effective answer to excessive humidity is a refrigeration-type dehumidifier. Warm moist air is drawn by a fan across a cold coil which causes the water vapor to condense onto the coil and drop into a container or tray. The cold air is then passed over a heat exchanger where it is warmed before being passed back into the surrounding area. A dehumidifier that has a humidistat which automatically switches it on and off saves energy and expense by maintaining the desired level of humidity with intermittent operation.
The Ebac SD120 industrial dehumidifier is basically comprised of:
2) Refrigerant Evaporator Coil
6) Cabinet to house the above components
Technical Specifications of Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifier
Swimming Pool/Spa areas, locker and laundry rooms, industrial areas
Dehumidifiers water-removal capacity (pints per day set at 86F, 80 %RH)
Set at 86°F, 65% RH: 137 pints per day
Set at 86°F, 75% RH: 185 pints per day
Refrigerant Type (environmentally friendly)
Dehumidifiers operating temp. range
Dehumidifiers CFM (blower air flow)
51 dba, compared to normal conversation at 60 dba
Power supply (voltage, amps, etc.)
724.5 watts, 115V, 60hz, 6.3 amps
Reports by consumer experts on Ebac SD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
We recommend these dehumidifiers for anyone who needs a powerful, quiet, and efficient dehumidifier to remove large amounts of moisture within an indoor pool facility, aerobic room, workout area, or locker and laundry rooms.
* Easy installation: requires little installation and set-up time. Simply connect power cable to grounded power source, install draining tube, start up unit and check dehumidification process listed in manual
* Remote humidistat included: allows one to mount it on the wall for ease in setting and monitoring the level of dryness
* Low noise level: considering how powerful these dehumidifiers operate at a relatively quiet noise level reading of 51 dba (compare to 20 dba as a whisper, and 60 dba as a normal conversation
* Energy Efficient: In comparison to how much water they remove these dehumidifiers run at an amperage of up to 6.3 amps per hour
* High quality construction: all of the essential wiring is tightly sealed inside the cabinet to protect them from the moisture and chemicals
* It would have been nice for ease of set-up or relocation if they had casters.
* Although these units do the job and removes lots of moisture a more attractive cabinet would have been nice.
Ebac’s SD120 dehumidifiers are the answer for anyone who currently has an existing indoor swimming pool/spa area and are in need of an easy resolution to the moisture problems resulting from this environment without complicated installation and ducting. Their quietness and energy efficiency along with their tremendous moisture removal potential make them an excellent choice for anyone with high humidity issues.
• Excludes furniture, Americare whole house air purifiers and Ebac dehumidifiers as noted on their respective ordering pages.
• Canadian Residents: You may have additional import/country taxes applied to your orders. We advise that you contact your local authorities for information.
• When ordering a mattresses and/or boxspring weighing over 250 lbs. to be delivered above the 3rd floor of a building without an elevator, we will have to charge a fee of $50 per each additional flight of stairs above the 3rd floor.
We are committed to your 100% Satisfaction!
If you change your mind and wish to return your purchase, we will be happy to accept your return certain product exceptions apply as indicated below.
All Products are returnable with these exceptions:
• Exchange only for air conditioners, furnace filters (standard sizes only), and particle counters.
Items which are not returnable:
• Replacement filters, rugs, respirators, custom-sized furnace filters
• Crib mattresses and Royal Pedic mattress pads, adjustable beds, and organic mattresses
• Opened bedding products (i.e. pillows, pillow cases, comforters, sheets, encasings)
• Custom ordered products: (maple furniture, Euphoria beds & bedding, Siberian down comforters, CottonFresh encasings)
If you wish to return any item in your order, please read the instructions below.
Please follow these simple instructions.
1. No returns will be accepted without our Return Authorization Number.
to request a Return Authorization Number and we will promptly contact you with this number.
If you have placed an order and would like to cancel it for any reason, please contact us immediately by calling 1-(***)-236-7231 (select option 5) or complete our online form at
Temporary Email: whitney_morse@dontscrapit.com (Whitney Morse)
