DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS > South Dakota
> Industrial
> New smc CDRB1BW30-180S
New smc CDRB1BW30-180S
New smc CDRB1BW30-180S
Rotation angles: 180° Low pressure operation made possible Direct mount applications possible The rotary actuator body can be mounted directly. Unrestricted auto switch mounting positions Double vane style standard: High reliability Stainless steel shafts and bolts (Carbon steel for size 30 and double-vane) To support thrust and radial loads, bearings are used throughout the series. In addition, rubber bumpers are used internally to further improve reliability. The outside diameter is identical to the single vane construction (except size 10); however, due to the double vane construction, twice the torque of the single vane style can be obtained. Because the switch can be moved anywhere along the circumference, it can be mounted in a position that is most appropriate for the application. Through the adoption of specially designed seals and stoppers, a swing angle of 270° has been achieved for the first time in a compact vane style actuator. (Single vane style) The special sealing construction that has been adopted in the body supports a wide operating pressure range and enables the entire series to be used at low pressures. Min. operating pressure Size 15 to 30: 0.15Mpa *Direct mounting is not possible with unit sizes 10 to 30. The positions can be selected for ease of use. FOR MORE INFORMATION :
Temporary Email: A_sargent@dontscrapit.com (Arline Sargent)
