DO NOT SCRAP IT! MODERATED NATIONAL EXCHANGE NEWSGROUP FOR SALVAGERS   >   Virginia   >   Construction   >   Rigging shackles 3/4, 7/8

Rigging shackles 3/4, 7/8


Rigging shackles 3/4, 7/8

I have a group of Screw Pin Anchor Shackles for sale, all of them are used but in normal condition for a used shackle as well as being in "SAFE" condition. None of the ears are spread and only a couple of them have wire rope gouges, nothing out of the ordinary that would make them unsafe to use. There is some light rust on a few of them, but again, nothing to harm the integrity and strength of the shackle. All the pins turn smoothly and other than the paint being chipped off, they are in good condition.
There are 2 different sizes in the lot, as shown in the pictures. The 4 shackles in the upper portion of the picture are all Chigago Brand 3/4" diameter with a SWL (Safe Working Load) of 4-3/4 Ton (9400lbs).
The other 4 shackles are 7/8" diameter with a SWL of 6-1/2 Ton (13,000lbs). Two of them are Chigago brand, the other 2 are made by Cambell.
Total weight of package: 24lbs
Temporary Email: Jeremy_Harper@dontscrapit.com (Jeremy Harper)




Rigging shackles 3/4, 7/8 Rigging shackles 3/4, 7/8 Rigging shackles 3/4, 7/8 Rigging shackles 3/4, 7/8